HP StorageWorks MSL2024 Tape Library firmware release notes Firmware version 5.
Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L.P.
Version: 5.50 Description This release includes updated firmware for the HP StorageWorks MSL2024 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Library firmware version 5.50 Compatible robotics firmware version Update recommendation Supersedes 3.10e Recommended All previous versions of Library firmware.
Version 5.40 • Fixed incorrect error messages when an Encryption Kit PIN is entered that is shorter than the required eight characters. Now, the correct response At least 8 characters are required for PIN! is displayed on an RMI screen dialog. Prior versions could display either The entered PIN is too long. A maximum of 15 characters are allowed for PIN! or Invalid key server token PIN is entered.
1. Download and install the current version of HP Library & Tape Tools (L&TT) from the HP website: http://www.hp.com/support/tapetools. 2. Download current firmware using L&TT. 3. Click the device to update in the device list. 4. Click Firmware on the main toolbar. 5. On the Update Firmware tab, select the box next to each device for which you want to update firmware. If firmware is currently available for that device, it is shown in Firmware File in the File Selection section of the screen. 6.
All versions not listed are inactive. Versions marked manufacturing only are not available for download. Table 1 MSL2024 firmware versions Firmware version Released Status 5.50 7/12/2011 Active 5.40 5/3/2011 Inactive 5.00 9/20/2010 Active 1.
