Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 285
53-1000599-02
iodReset
2
iodReset
Disables the in-order delivery (IOD) option.
Synopsis iodreset
Description Use this command to disable in-order delivery enforcement on the local switch. IOD is disabled by
default, and can only be disabled after it has been enabled with the iodSet command.
Disabling IOD allows faster re-routing after a fabric topology change, but it may cause out-of-order
delivery of frames during fabric topology changes. As an alternative to disabling IOD, you may
consider minimizing the delay associated with IOD. Use the iodDelaySet command to configure IOD
delay values.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To turn off the IOD option:
switch:admin> iodreset
switch:admin> iodshow
IOD is not set
See Also iodSet, iodShow, iodDelaySet, iodDelayReset, iodDelayShow