Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

328 Fabric OS Command Reference
53-1000599-02
licenseRemove
2
licenseRemove
Removes the license key from the system.
Synopsis licenseremove "license"
Description Use this command to remove an existing license key from a switch. The existing license key must
be entered exactly as shown by licenseShow, including case.
When the key has been entered, use the licenseShow command to verify that the key has been
removed and the licensed product uninstalled.
After removing a license key, the switch must be rebooted. With no license key, licenseShow
displays “No licenses.”
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands The following operand is required:
"license" Specify the license key, in quotation marks. This operand is required
.
Examples To remove a license key from the switch:
switch:admin> licenseremove "bQebzbRdScRfc0iK"
removing license key "bQebzbRdScRfc0iK"
See Also licenseAdd, licenseHelp, licenseIdShow, licenseShow