Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 357
53-1000599-02
nbrStateShow
2
nbrStateShow
Displays the state of FSPF neighbors.
Synopsis nbrstateshow [slotnumber/][portnumber]
Description Use this command to display information about fabric shortest path first (FSPF) neighbors to the
local switch or information about a neighbor to a specified port. FSPF defines a neighbor as a
remote E_Port interface that is directly attached to the local switch. However, if ports are trunked,
the command displays data only about the trunk master. The command displays the following
fields:
Local Domain ID Domain number of local switch.
Local Port E_Port (interface) on local switch. This value is typically equal to the Area field
reported in the switchShow command.
Domain Domain number of remote switch.
Remote Port E_Port (interface) on remote switch.
State State of the neighbor. The E_Port is used to route frames only if the neighbor
is in NB_ST_FULL state.
Operands This command has the following operands:
slotnumber For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is optional; if omitted, all neighbor
states are displayed.
Examples To display information about switches directly connected to the local switch:
switch:user> nbrstateshow 2/0
Local Domain ID: 1
Local Port Domain Remote Port State
-------------------------------------------------------
16 2 48 NB_ST_FULL
See Also interfaceShow