Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Table Of Contents
Fabric OS Command Reference 493
53-1000599-02
portLogPdisc
2
portLogPdisc
Sets or clears the debug_pdisc_flag.
Synopsis portlogpdisc 0 | 1
Description Use this command to set or clear the debug_pdisc_flag. This command is part of the environmental
monitor. A setting of 1 will enable logging of Port Discovery parameters. The PDISC log is disabled
by default.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operand:
0|1 Specify 0 to clear or 1 to set the debug_pdisc_flag. The default is 0.
Examples To set the debug_pdisc_flag:
switch:admin> portlogpdisc 1
PDISC log setting = 1
See Also none