Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 497
53-1000599-02
portLogShow
2
sn Speed negotiation states.
fcin Incoming Fibre Channel information unit.
fcout Outgoing Fibre Channel information unit.
read Information unit header log from read operation.
write Information unit header log from write operation.
err Information unit header log of an FC error frame.
frame FC frame payload.
nsRemQ Interswitch name server query.
rscn RSCN.
xalloc Allocate an exchange.
xfree Free an exchange.
xerr Exchange error.
xstate Exchange state.
payload Frame payload.
Port Displays the port number that logged the event.
Cmd Defined by the event. Displays a value defined by the event as follows:
ioctl I/O control command code.
Tx & Rx Frame payload size.
scn New state (see state codes below).
pstate New physical state (see pstate codes below).
ctin The CT-subtype:
fc Simple Name Server.
f8 Alias Server.
ctout Same as ctin.
errlog Error level (refer to errShow).
loopscn Current loop state during loop initialization, possible values are:
OLP Offline (disconnected or nonparticipating).
LIP FL_Port entered INITIALIZING or OPEN_INIT state.
LIM LISM completed, FL_Port became the loop master.
BMP Loop init completed, FL_Port in MONITORING state.
OLD Port transited to the OLD_PORT state.
TMO Loop init times out.
Args Displays additional information about the event as follows:
start Start type: 0 = enable ports, 100 = disable ports.
disable State (refer to state codes).