HP StorageWorks Fabric OS 6.3.3d Release Notes (5697-0493, May 2010 - includes all 6.3.0x versions)

WebTools functionality moved to DCFM
The functionality that was moved from WebTools 6.1.1 to DCFM applies to all versions of DCFM and
also applies to 6.3.x. Table 9 describes these changes.
Table 9 WebTools functionality in DCFM
CommentsDCFMWebTools 6.1.0Function
Configure > Zoning
Reverse Find in the zoning dialog
provides the view of the zoned
and unzoned devices in the fabric
if all zone members are selected
for Find.
Zone AdminAdd unzoned devices
Configure > Zoning:
Reverse Find in the zoning dialog
provides the view of the zoned
and unzoned devices in the fabric
if all zone members are selected
for Find.
Device Tree and Topology:
Connected End Devices: Custom
display from the top level in the
main frame provides the device
tree and topology view for all the
zoned devices if all zones are
selected in the active zone
configuration.
Zone AdminAnalyze zone config
Configure > ZoningZone AdminDefine device alias
Configure > Zoning
The Compare dialog provides the
Storage-Host and Host-Storage
view in a tree representation that
is comparable to the Device
Accessibility Matrix when all
devices are selected.
Zone AdminDevice accessibility matrix
Monitor > Logs > EventsMonitor > Fabric eventsFabric events
Monitor > Reports > Fabric
Summary report
Reports > Fabric summaryFabric summary
Viewing FCIP tun-
nels is still suppor-
ted in WebTools
6.1.1, but New,
Edit Config, and
Delete are avail-
able only in
DCFM.
Configure > FCIP tunnelPort Admin Module >
GigE tab
FCIP tunnel configuration
HP StorageWorks Fabric OS 6.3.0d Release Notes 39