HP StorageWorks Fabric OS 6.3.3d Release Notes (5697-0493, May 2010 - includes all 6.3.0x versions)

Fixed in Fabric OS 6.3.0
Running configdefault may cause Kernel panic on HP Storage-
Works 4/256 SAN Director.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
Run hafailover.
High CPU load occurs and no commands can be run after CALD alloc-
ated shared memory is not released by applications.
Fixed in Fabric OS 6.3.0
Pending Merge: Repeatedly disconnecting and then reconnecting the
ISL links between the HP StorageWorks Encryption SAN Switch in the
HA cluster environment while rekey operations are in progress may
cause data miscompare.
Fixed in Fabric OS 6.3.0
Encryption group does not automatically recover after it is split into 2
different islands.
Fixed in Fabric OS 6.3.0
Firmwaredownload failed on HP StorageWorks DC SAN Director.
Fixed in Fabric OS 6.3.0
Pending Merge: Host throughput drops 75% when rekey is started.
Fixed in Fabric OS 6.3.0
All LUNs in a container are showing target offline.
Fixed in Fabric OS 6.3.0
After encountering a rare error condition, a switch or director may fail
to clear an interrupt, resulting in a persistently high CPU load.
Fixed in Fabric OS 6.3.0
SNMP v3 user configuration reverts back to defaults after HAfail-
over.
Fixed in Fabric OS 6.3.0
IFCCs occur when disabling trunks and having DPS enabled.
Fixed in Fabric OS 6.3.0
Reset factory default using the faceplate pinhole caused FFDC and
VCM shows "No Communication" to the switch
Fixed in Fabric OS 6.3.0
Pending Megre: During rekey operations, continuously disconnecting
and reconnecting the ISL links between 2 cluster nodes, causes one of
the LUNs to hang at "LUN discovery" state.
Fixed in Fabric OS 6.3.0
Pending merge: Rekeying and toggling ISL to trigger HAC failover in
4 node dual fabric caused the DC Switch Encryption Blade in slot3 of
the DC SAN Director and Encryption SAN Switch fault: BKSW-1003]
HL_BES101, kSWD: Detected unexpected termination of: ''[4]CVLC.
Fixed in Fabric OS 6.3.0
Workaround prior to code change:
CPs were not in sync when
downgrading to 6.1.1a. Did net
install on DC SAN Director to 6.1.1a
and upgrade to 6.2.0b.
DC SAN Director-upgrade from 6.1.1a to 6.2.0, hit FFDC, then panic-
detected termination of process pdmd:2676.
Fixed in Fabric OS 6.3.0
Pending Merge: Encryption SAN Switch Faulty during reboot -f test.
Fixed in Fabric OS 6.3.0
SNMPd core file filled up the root file system on the DC04 SAN Direct-
or.
Fixed in Fabric OS 6.3.0
Continuously disconnecting and reconnecting the ISLs in the HA envir-
onment causes one of the Encryption SAN Switches to go into faulty
state.
HP StorageWorks Fabric OS 6.3.0d Release Notes 49