HP StorageWorks Fabric OS 6.3.3d Release Notes (5697-0493, May 2010 - includes all 6.3.0x versions)

SolutionClosed defect summary
Fixed in Fabric OS 6.3.0b
Excessive internal messages cause a RASLOG flood condition and a
weblinkerfcg message appears on FCIP switches in the fabric (HP
StorageWorks 1606 Extension SAN Switch and Multiprotocol Extension
Blade). This can lead to other important RASLOG messages being lost.
This condition occurs with IPSEC, which is not supported in this release.
Fixed in Fabric OS 6.3.0b
HP StorageWorks DC SAN Director panicks and reboots after
anfwshow --disable --port command is issued.
Fixed in Fabric OS 6.3.0b
SMI fails to discover all switches over EX_Port after an hafailover,
and reports LOGIN FAILED after the GPL2 query targeted to the
translate domain is rejected.
Fixed in Fabric OS 6.3.0b
workaround prior to upgrade:
Log in using a serial console and
reimport the LDAP certificate(s).
After upgrading from Fabric OS 6.2.0g to 6.3.0, LDAP certificates
are missing and you may not be able to log in to the switch using LDAP
authentication. The degree to which the user is locked out depends on
how the LDAP environment was set up.
Fixed in Fabric OS 6.3.0b
After an HCL firmware upgrade, device connectivity is lost when the
zone is enabled on an HP StorageWorks 1606 Extension SAN Switch.
Fixed in Fabric OS 6.3.0b
When a switch running Fabric OS 5.2.x sends an internal query to
directors that were not properly set up to handle switches with more
than 256 ports, a segmentation fault causes a CALD panic in the fabric.
Fixed in Fabric OS 6.3.0b
When performing Power On Reset (POR) on an HP StorageWorks DC
SAN Director in a FICON environment, a kernel panic causes the
switch to crash and reboot.
Fixed in Fabric OS 6.3.0b
An HP Storageworks 1606 SAN Extension Switch crashes after con-
necting FCIP ports to a test device that performs various perturba-
tions/error injection on the port.
Fixed in Fabric OS 6.3.0b
A strict fabric-wide policy conflict occurs on dual CP switches (directors)
after an HA failover, leading to switch segmentation.
Fixed in Fabric OS 6.3.0b
In a FICON environment, block port is not displayed in the IPL file
after host blocks port in-band, due to IPL file not being updated.
Fixed in Fabric OS 6.3.0b
In a FICON environment, RLIR of DRLIR in an interopmode 2 fabric
does not contain a domain offset of 0x60 in PID and TAG fields.
Fixed in Fabric OS 6.3.0b
A HP StorageWorks 1606 SAN Extension Switch panicked and
crashed during an overnight I/O test in FMS mode (FICON CUP).
Fixed in Fabric OS 6.3.0b
Internal FICON error occurs during a port swap in FMS mode.
Fixed in Fabric OS 6.3.0b
After a non-disruptive firmware upgrade, when a port on an HP Stor-
ageWorks 1606 SAN Extension Switch is changed from EX_Port to
NPIV, NPIV devices cannot log in to the switch.
Fixed in Fabric OS 6.3.0b
Workaround prior to upgrade:
Disable FICON XRC emulation.
FICON emulation does not handle the abort sequence correctly, which
causes DSO FICON CRC errors during XRC RRS processing. Eventually,
the session that encountered the error becomes suspended.
HP StorageWorks Fabric OS 6.3.0d Release Notes 75