Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

166 Fabric OS Command Reference Manual
53-1000436-01
fabSwitchShow
2
fabSwitchShow
Displays the fabric switch state structure information.
Synopsis fabswitchshow
Description Use this command to display the fabric switch state structure information. This command is strictly
for debugging; it is not intended as a user command.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To display fabric switch state structure:
switch:admin> fabswitchshow
Fabric Switch State Structure Information
=========================================
State: D0
Stage: warm done
Rdi Receive Timer: 0x10069400, IDLE STATE
Unconfirmed Sw Timer: 0x10069508, IDLE STATE
NTP Timer: 0x100695b8, IDLE STATE
ME Timer: 0x10069610, IDLE STATE
Principal Domain: 2
Upstream Port: 64
Principal Wwn: 10:00:00:60:69:80:06:ce
Principal Priority: 0x2
Flags: 0x40
me retry count: 0
inq_sem count: 1
dbg_sem count: 1
ha efp count: 0
fab_q current count: 0
fab_q high water: 8
fab_q age: 0 (sec)
dup xid occurrence: 0
iu nodes outstanding: 0
EFP update port: 2
FWN frames pending 0
test check point: No check point set
fabric license: TRUE
fabric EFP version: 7
last message:
20:30:29.826 *Snd inquiry (4) D0,NA D0,NA NA NA
NTP ports online:
RSCN domain recovery list:
no domain RSCN's to recover
reachable domains:
1 3 4
3 domains reachable
Ports used for EFP/BF/DIA flood:
(output truncated)