Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

282 Fabric OS Command Reference Manual
53-1000436-01
haSyncStart
2
haSyncStart
Enables HA state synchronization.
Synopsis hasyncstart
Description Use this command to enable the HA state synchronization.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Examples To enable the HA state synchronization:
switch:admin> hasyncstart
HA State synchronization has started
See Also haFailover, haShow, haSyncStop