Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 335
53-1000436-01
itemList
2
The exact type of list varies, depending on the test and the parameter; however, the most common
are blade ports and user ports. A list of blade ports is most commonly used by ASIC-level tests such
as cmiTest or turboRamTest and represents which ports on the current blade (specified with --slot
number) are tested. A list of user ports is used by the higher-level tests, such as spinSilk to specify
which user-accessible external ports within the current switch (selected during telnet login) are
tested. When specified in an item list, user ports might be specified by either the area portion of
the ports Fibre Channel address or with slot/port notation. For nonblade systems, the port number
on the silkscreen is the area number, so the two notations are identical.
The exact type of list required for any input parameter might be determined with the
diagCommandShow test command. For item list parameters, the parameter type is PT_LIST and
the list type is one of those shown in the table.
Operands none
Examples Refer to the command in next section for example outputs using itemList.
See Also backport, camTest, centralMemoryTest, cmemRetentionTest, cmiTest,
diagCommandShow, portLoopbackTest, portRegTest, spinSilk, sramRetentionTest
TABLE 15 Object Descriptions
Type Grouping Description
BPORTS Blade Blade ports, internal and external ports
UPORTS Switch User ports, ports with external connections
QUADS Blade Quadrants, group of (normally four) ports
CHIPS Blade Chips, ASICs within a blade
MINIS Blade Mini-switches
SLOTS Chassis Slots
INDEX n.a. Anything