Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 421

53-1000436-01

perfDelFilterMonitor

Deletes one or all filter-based performance monitors from a port.

Synopsis perfdelfiltermonitor [slotnumber/]portnumber [monitorid]

Description Use this command to delete a filter-based performance monitor from a port, or all such monitors

associated with a port.

This command requires a Brocade Advanced Performance Monitoring license.

This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and

GbE ports.

The execution of this command is subject to Admin Domain restrictions that may be in place.

Operands This command has the following operands:

slotnumber For bladed systems only, this operand specifies the slot number of the port

on which the monitor is to be deleted, followed by a slash (/).

portnumber Specifies the number of the port on which the monitor is to be deleted,

relative to its slot for bladed systems. Use switchShow for a list of valid ports.

monitorid Specify the monitor number to delete. Monitor numbers are defined when

created and can be displayed using perfShowEEMonitor. This operand is

optional. If not specified, all monitor counters on the port are deleted.

Optionally, a comma can separate the operands. A space is required to separate the operands

even when using commas.

Examples To delete filter monitor 4 from a port, and then all filter monitors from the port:

switch:admin> perfdelfiltermonitor 2/3 4

The specified filter-based monitor is deleted.

switch:admin> perfdelfiltermonitor 2/3

This will remove ALL monitors on port 19, continue? (yes, y, no, n): [no] y

See Also perfAddUserMonitor, perfShowFilterMonitor