Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 693
53-1000436-01
sysShutdown
2
sysShutdown
Provides a graceful shutdown to protect the switch file systems.
Synopsis sysshutdown
Description For Brocade (nonbladed) switches, use this command to shutdown the switch operating system.
For Brocade directors, when sysShutdown is called in the active control processor (CP), the
command shuts down the active CP, standby CP, and any AP blades.
After doing this, you need to manually power off the system. If you want to reboot the system,
manually turn the power switch on.
This command is not supported on the standby CP.
The execution of this command is subject to Admin Domain restrictions that may be in place.
Operands none
Examples To perform a system shutdown in a Brocade switch:
switch:admin> sysshutdown
This command will shutdown the operating systems on your switch.
You are required to power-cycle the switch in order to restore operation.
Are you sure you want to shutdown the switch [y/n]? y
Broadcast message from root (ttyS0) Mon Sep 12 17:52:12 2005...
The system is going down for system halt NOW !!
INIT: Switching to runlevel:
INIT: Sending processes the TERM signal
ess095:root> Unmounting all filesystems.
The system is halted
flushing ide devices: hda
Power down.
To perform a system shutdown from the active CP in a dual-CP platform:
switch:admin> sysshutdown
This command will shutdown the operating systems on your switch.
You are required to power-cycle the switch in order to restore operation.
Are you sure you want to shutdown the switch [y/n]? y
This is the active Cp
2005/09/13-01:15:13, [FSSM-1003], 414,, WARNING, Brocade48000, HA State out of
sync
HA is disabled
Broadcast message from root (ttyS0) Tue Sep 13 01:15:14 2005...
The system is going down for system halt NOW !!
INIT: Switching to runlevel: 0
INIT: Sending processes the TERM signal
Unmounting all filesystems.
umount2: Device or resource busy
umount: /tmp: device is busy
The system is halted
flushing ide devices: hda
Power down.
ppc440gx System Halted