Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 3-11
Publication Number: 53-1000242-01
BL-1027
3
Recommended
Action
Collect supportSave information, then reboot switch and run POST. If problem persists, replace switch.
Severity CRITICAL
BL-1027
Message
Probable
Cause
Indicates that the blade failed to boot properly.
Recommended
Action
Reboot or power cycle the blade.
If the message persists, replace the blade.
Severity CRITICAL
BL-1028
Message
Probable
Cause
Indicates that the switch's internal processor was reset before the initialization completed.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, replace the switch.
Severity CRITICAL
BL-1029
Message
Probable
Cause
Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded
and resulted in the cold upgrade. As part of the upgrade, all the datapath elements were reset.
<timestamp>, [BL-1027], <sequence-number>,, CRITICAL, <system-
name>, Blade in slot <slot number> faulted, boot failed; status
0x<boot status> 0x<1250 0 boot status> 0x<1250 1 boot status>.
<timestamp>, [BL-1028], <sequence-number>,, CRITICAL, <system-
name>, Switch faulted; internal processor was reset before switch
init completed.
<timestamp>, [BL-1029], <sequence-number>,, INFO, <system-name>,
All ports on the switch will be reset as part of the firmware
upgrade.