Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 11-5
Publication Number: 53-1000242-01
FABR-1011
11
Probable
Cause
Indicates that the errors occurred while cleaning up the RDI (request domain ID). The error description
provides further details. This message is rare and usually indicates a problem with the Fabric OS.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
FABR-1011
Message
Probable
Cause
Indicates that the Fabric OS is unable to inform the FSSME (Fabric OS State Synchronization
Management module) that the fabric is stable or unstable. This message is rare and usually indicates a
problem with the Fabric OS.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
FABR-1012
Message
Probable
Cause
Indicates that the fabric is not in the appropriate state for the specified process. This message is rare and
usually indicates a problem with the Fabric OS.
Recommended
Action
The fabric daemon will take proper action to recover from the error.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
FABR-1013
Message
<timestamp>, [FABR-1011], <sequence-number>, FFDC, ERROR, <system-
name>, <error description>
<timestamp>, [FABR-1012], <sequence-number>,, WARNING, <system-
name>, <function stream>: no such type, <invalid type>
<timestamp>, [FABR-1013], <sequence-number>, FFDC, CRITICAL,
<system-name>, No Memory: pid=<fabric process id> file=<source file
name> line=<line number within the source file>