Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 12-3
Publication Number: 53-1000242-01
FABS-1007
12
If the message persists, run the firmwareDownload command to update the firmware.
Severity WAR NIN G
FABS-1007
Message
Probable
Cause
Indicates that the Fabric OS has detected an invalid value in an object's status field. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity WAR NIN G
FABS-1008
Message
Probable
Cause
Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an internal
Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WAR NIN G
FABS-1009
Message
Probable
Cause
Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
Severity WAR NIN G
<timestamp>, [FABS-1007], <sequence-number>,, WARNING, <system-
name>, <Function name>: Media state is invalid - status=<Status
value>
<timestamp>, [FABS-1008], <sequence-number>,, WARNING, <system-
name>, <Function name>: Media oid mapping failed
<timestamp>, [FABS-1009], <sequence-number>,, WARNING, <system-
name>, <Function name>: type is not media