Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 12-5
Publication Number: 53-1000242-01
FABS-1013
12
FABS-1013
Message
Probable
Cause
An unrecognized type of blade has been discovered in the system.
This may be caused by an incorrect FRU header, inability to read the FRU header, or the blade may not
be supported by this platform or Fabric OS version.
Recommended
Action
Verify that the blade is valid for use in this system and this version of Fabric OS.
Try reseating the blade.
If this is a valid blade and reseating does not fix the problem, then replace the blade.
Severity ERROR
FABS-1014
Message
Probable
Cause
An unrecognized type of FRU has been discovered in the system.
This may be caused by an incorrect FRU header, inability to read the FRU header, or the FRU may not
be supported by this platform or Fabric OS version.
Recommended
Action
Verify that the FRU is valid for use in this system and this version of Fabric OS.
Try reseating the FRU.
If this is a valid FRU and reseating doesn't help, then replace the FRU.
Severity ERROR
FABS-1015
Message
<timestamp>, [FABS-1013], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:Unknown blade type 0x<Blade
type>
<timestamp>, [FABS-1014], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:Unknown FRU type 0x<FRU Object
type>
<timestamp>, [FABS-1015], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:Request to enable FRU type
0x<FRU Object type>, unit <Unit number> failed. err code <Error
code>