Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 13-1

Publication Number: 53-1000242-01

Chapter

FBC System Messages

FBC-1001

Message

Probable

Cause

The CP determined that the version of firmware running on the AP blade is not compatible with the

version of firmware running on the CP.

Recommended

Action

The problem can be corrected by changing the version of firmware on the CP or AP blades. The

firmware version on the CP blade can be changed using the firmwareDownload command. Refer to the

release notes to determine whether a non-disruptive firmwareDownload is supported between the

versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the

AP blade. If required, send the AP blade back to the factory to get a new firmware version installed.

Severity ERROR

<timestamp>, [FBC-1001], <sequence-number>,, ERROR, <system-name>,

Firmware version on AP blade is incompatible with that on the CP.