Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 18-13
Publication Number: 53-1000242-01
FCR-1038
18
FCR-1038
Message
Probable
Cause
Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the local
switch's zone database limitations.
Recommended
Action
Remove excess cfg/zone/alias entries so that the number of LSAN zones created is within the range of
the local database limitations.
Severity WAR NIN G
FCR-1039
Message
Probable
Cause
Indicates that the number of devices in an LSAN defined in the backbone fabric is greater than allowed
by the local LSAN zone database limitations.
Recommended
Action
Remove excess device entries from this LSAN zone until the number of devices is within the range of
the local LSAN zone database limitations.
Severity INFO
FCR-1040
Message
Probable
Cause
Indicates that a proxy device created in the backbone fabric was deleted.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [FCR-1038], <sequence-number>,, WARNING, <system-
name>, Total zone entries exceeded local fabric limits by
<overflow> entries, in zone: <zone name>, zone limit: <LSAN zone
limit>.
<timestamp>, [FCR-1039], <sequence-number>,, INFO, <system-name>,
Local LSAN zone <zone name> device entries for backbone LSAN
exhausted.
<timestamp>, [FCR-1040], <sequence-number>,, INFO, <system-name>,
Proxy device deleted in the backbone fabric.