Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 23-3
Publication Number: 53-1000242-01
FSS-1006
23
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
FSS-1006
Message
Probable
Cause
Indicates that data is not available on the FSS device.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
FSS-1007
Message
Probable
Cause
Indicates that the Ethernet connection is not healthy.
Recommended
Action
Check the Ethernet connection and issue the haSyncStart command. If the problem persists, contact
your switch service provider.
Severity CRITICAL
<timestamp>, [FSS-1006], <sequence-number>,, WARNING, <system-
name>, No FSS message available
<timestamp>, [FSS-1007], <sequence-number>,, CRITICAL, <system-
name>, <component name>: BAD connection