Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-1
Publication Number: 53-1000242-01
Chapter
25
FW System Messages
FW-1001
Message
Probable
Cause
Indicates that the internal temperature of the switch has changed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. To prevent recurring messages, disable the changed alarm for this threshold. If you receive
a temperature-related message, check for an accompanying fan-related message and check fan
performance. If all fans are functioning normally, check the climate control in your lab.
Severity INFO
FW-1002
Message
Probable
Cause
Indicates that the internal temperature of the switch has fallen below the low boundary.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Typically, low temperatures means that the fans and airflow of a switch are functioning
normally.
Verify that the location temperature is within the operational range of the switch. Refer to the hardware
reference manual for the environmental temperature range of your switch.
Severity WAR NIN G
<timestamp>, [FW-1001], <sequence-number>,, INFO, <system-name>,
<label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1002], <sequence-number>,, WARNING, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.