Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1003
25
FW-1003
Message
Probable
Cause
Indicates that the internal temperature of the switch has risen above the high boundary to a value that
might damage the switch.
Recommended
Action
This message generally appears when a fan fails. If so, a fan-failure message accompanies this message.
Replace the fan FRU.
Severity WAR NIN G
FW-1004
Message
Probable
Cause
Indicates that the internal temperature of the switch has changed from a value outside of the acceptable
range to a value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. If you receive a temperature-related message, check for an accompanying fan-related
message and check fan performance. If all fans are functioning normally, check the climate control in
your lab.
Severity INFO
FW-1005
Message
Probable
Cause
Indicates that the speed of the fan has changed. Fan problems typically contribute to temperature
problems.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Consistently abnormal fan speeds generally indicate that the fan is malfunctioning.
Severity INFO
<timestamp>, [FW-1003], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1004], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1005], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.