Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-15
Publication Number: 53-1000242-01
FW-1120
25
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended
Action
Verify that all ISL cables are properly connected at both ends. Verify that the SFP has not become faulty.
An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting.
Severity INFO
FW-1120
Message
Probable
Cause
Indicates that the number of fabric reconfigures has changed from a value outside of the acceptable
range to a value within the acceptable range. The following occurrences can cause a fabric
reconfiguration:
• Two switches with the same domain ID have connected to one another.
• Two fabrics have joined.
• An E_Port has gone offline.
• A principal link has segmented from the fabric.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1121
Message
Probable
Cause
Indicates that the number of domain ID changes has changed. Domain ID changes occur when there is a
conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the
switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
<timestamp>, [FW-1120], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1121], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.