Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-19
Publication Number: 53-1000242-01
FW-1129
25
FW-1129
Message
Probable
Cause
Indicates that the number of zone changes has changed. Zone changes occur when there is a change to
the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1130
Message
Probable
Cause
Indicates that the number of zone changes has fallen below the low boundary. Zone changes occur when
there is a change to the effective zone configuration. A low number of zone configuration changes
means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1131
Message
Probable
Cause
Indicates that the number of zone changes has risen above the high boundary. Zone changes occur when
there is a change to the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
<timestamp>, [FW-1129], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1130], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1131], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.