Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-22 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1138
25
FW-1138
Message
Probable
Cause
Indicates that the number of SFP state changes has fallen below the low boundary. SFP state changes
occur when the SFP is inserted or removed. A low number of SFP state changes means that the switch is
functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1139
Message
Probable
Cause
Indicates that the number of SFP state changes has risen above the high boundary. SFP state changes
occur when the SFP is inserted or removed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1140
Message
Probable
Cause
Indicates that the number of SFP state changes has changed from a value outside of the acceptable range
to a value within the acceptable range. SFP state changes occur when the SFP is inserted or removed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
<timestamp>, [FW-1138], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1139], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1140], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.