Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-26 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1168
25
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
FW-1168
Message
Probable
Cause
Indicates that the number of signal losses that the port experiences has changed. Loss of signal generally
indicates a physical problem.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
Severity INFO
FW-1169
Message
Probable
Cause
Indicates that the number of signal losses that the port experiences has fallen below the low boundary.
Loss of signal generally indicates a physical problem.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. A low number of signal loss errors means that the switch is functioning normally.
Severity INFO
FW-1170
Message
Probable
Cause
Indicates that the number of signal losses that the port experiences has risen above the high boundary.
Loss of signal generally indicates a physical problem.
<timestamp>, [FW-1168], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1169], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1170], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.