Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-31
Publication Number: 53-1000242-01
FW-1182
25
FW-1182
Message
Probable
Cause
Indicates that the number of invalid CRCs that the port experiences has risen above the high boundary.
Recommended
Action
This error generally indicates an deteriorating fabric hardware. Check your SFPs, cables, and
connections for faulty hardware. Verify that all optical hardware is clean.
Severity WAR NIN G
FW-1183
Message
Probable
Cause
Indicates that the number of invalid CRCs that the port experiences has changed from a value outside of
the acceptable range to a value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your SFPs,
cables, and connections for faulty hardware. Verify that all optical hardware is clean.
Severity INFO
FW-1184
Message
Probable
Cause
Indicates that the percentage of incoming traffic that the port experiences has changed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
Severity INFO
<timestamp>, [FW-1182], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1183], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
<timestamp>, [FW-1184], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.