Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

25-60 Fabric OS Message Reference
Publication Number: 53-1000242-01
FW-1340
25
Probable
Cause
Indicates that the number of DCC violations has changed from a value outside of the acceptable range
to a value within the acceptable range. DCC violations indicate that an unauthorized device tried to join
the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically
HBA ports) to specific switch ports. DCC policies ensure that whenever a device performs an FLOGI
request that the WWN specified in the FLOGI is validated to be connected to the authorized port.
Enforcement for private loop devices not performing FLOGI is done through the name server.
Recommended
Action
No action is required.
Severity INFO
FW-1340
Message
Probable
Cause
Indicates that the number of login violations has changed. Login violations indicate that a login failure
has been detected.
Recommended
Action
Run the errShow command to determine the IP location of the login attempt. Responses to security-
class messages depend on user policies. Consult your security administrator for response strategies and
policies.
Severity INFO
FW-1341
Message
Probable
Cause
Indicates that the number of login violations has fallen below the low boundary. Login violations
indicate that a login failure has been detected.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [FW-1340], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1341], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.