Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 25-67
Publication Number: 53-1000242-01
FW-1357
25
Probable
Cause
Indicates that the number of authentication failures has changed. Authentication failures can occur for
many reasons. The switch on the other side might not support the protocol, have an invalid certificate,
not be signed properly, or send unexpected packets. The port where authentication fails is segmented.
This counter keeps track of the number of authentication failures.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity INFO
FW-1357
Message
Probable
Cause
Indicates that the number of authentication failures has fallen below the low boundary. Authentication
failures can occur for many reasons. The switch on the other side might not support the protocol, have
an invalid certificate, not be signed properly or send unexpected packets. The port where authentication
fails is segmented. This counter keeps track of the number of authentication failures.
Recommended
Action
No action is required.
Severity INFO
FW-1358
Message
Probable
Cause
Indicates that the number of authentication failures has risen above the high boundary. Authentication
failures can occur for many reasons. The switch on the other side might not support the protocol, have
an invalid certificate, not be signed properly or send unexpected packets. The port where authentication
fails is segmented. This counter keeps track of the number of authentication failures.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity WAR NIN G
<timestamp>, [FW-1357], <sequence-number>,, INFO, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
<timestamp>, [FW-1358], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.