Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 26-1
Publication Number: 53-1000242-01
Chapter
26
HAM System Messages
HAM-1001
Message
Probable
Cause
Indicates that a standby CP device error is reported by the high-availability manager (HAM) Health
Monitor, with a specific device and Log="YES" Class="NONE" Severity level. The severity level can
be "critical", "major", or "minor".
The active CP will continue to function normally, but because the standby CP is not healthy,
nondisruptive failover is not possible.
Recommended
Action
Reboot the standby CP blade by ejecting the card and reseating it.
If the problem persists, replace the standby CP.
Severity CRITICAL
HAM-1002
Message
Probable
Cause
Indicates that all of the standby CP devices monitored by the HAM Health Monitor report no error.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [HAM-1001], <sequence-number>, FFDC, CRITICAL,
<system-name>, Standby CP is not Healthy, device <device name>
status BAD, Severity = <Log="YES" Class="NONE" Severity>
<timestamp>, [HAM-1002], <sequence-number>,, INFO, <system-name>,
Standby CP is Healthy