Manualshelf

Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit
291292293294295296297298299300
27-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
HAMK-1003
27
HAMK-1003
Message
Probable
Cause
Indicates that the active CP blade detects the standby CP blade. This message indicates that the standby
CP blade is available to take over in case a failure happens on the active CP blade. This message is
typically seen when the standby CP blade reboots.
Recommended
Action
No action is required. This message means that the standby CP is healthy.
Severity INFO
HAMK-1004
Message
Probable
Cause
Indicates that the standby CP is being reset due to a loss of heartbeat. This message is typically seen
when the standby CP has been rebooted. Note that in certain circumstances a CP may experience a
double reset and reboot twice in a row. A CP can recover automatically even if it has rebooted twice.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [HAMK-1003], <sequence-number>,, INFO, <system-name>,
Heartbeat up
<timestamp>, [HAMK-1004], <sequence-number>,, INFO, <system-name>,
Resetting standby CP (double reset may occur)