Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 28-13
Publication Number: 53-1000242-01
HIL-1503
28
Make sure that the area is well ventilated and that the room temperature is within operational range of
your switch. Refer to the hardware reference manual for your switch for the operational temperature
range.
If the message persists, replace the blade.
Severity CRITICAL
HIL-1503
Message
Probable
Cause
Indicates that the temperature of this blade has risen above the maximum threshold for at least two
minutes. The blade is shut down to prevent further damage. This usually follows a high-temperature
warning message.
Recommended
Action
Run the fanShow command to verify all the fans are working properly.
Make sure that the area is well ventilated and that the room temperature is within operational range of
your switch. Refer to the hardware reference manual for your switch for the operational temperature
range.
If the message persists, replace the faulty blade.
Severity CRITICAL
HIL-1504
Message
Probable
Cause
Indicates that temperatures in the system have returned to normal.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [HIL-1503], <sequence-number>, FFDC, CRITICAL,
<system-name>, Slot <slot number>, unit shutting down.
<timestamp>, [HIL-1504], <sequence-number>,, INFO, <system-name>,
System within normal temperature specifications (<measured
temperature> C).