Manualshelf

Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit
311312313314315316317318319320
29-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
HLO-1003
29
HLO-1003
Message
Probable
Cause
Indicates that the HLO message received was invalid and the frame was dropped. The Brocade switch
will not accept FSPF frames from the remote switch.
The switch has received an invalid HLO because either the domain or port number in the HLO message
has an invalid value. This error can only occur when the Brocade switch is connected to a switch from
another manufacturer.
Recommended
Action
The HLO message of the remote switch must be compatible with the value specified in the FSPF
protocol. Refer to documentation of the other manufacturer's switch to change this value.
Severity ERROR
<timestamp>, [HLO-1003], <sequence-number>,, ERROR, <system-name>,
Invalid Hello received from port <port number>, Domain = <domain
ID>, Remote Port = <remote port ID>