Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 47-1

Publication Number: 53-1000242-01

Chapter

PDM System Messages

PDM-1001

Message

Probable

Cause

Indicates that the PDM process could not parse the configuration file. This might be caused by a

missing configuration file during the installation.

Recommended

Action

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity WAR NIN G

PDM-1002

Message

Probable

Cause

Indicates that the PDM process could not initialize the IPC mechanism.

Recommended

Action

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity WAR NIN G

PDM-1003

Message

<timestamp>, [PDM-1001], <sequence-number>,, WARNING, <system-

name>, Failed to parse the pdm config

<timestamp>, [PDM-1002], <sequence-number>,, WARNING, <system-

name>, ipcInit failed

<timestamp>, [PDM-1003], <sequence-number>,, WARNING, <system-

name>, pdm [-d] -S <service> -s <instance>