Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 47-3
Publication Number: 53-1000242-01
PDM-1007
47
Probable
Cause
Indicates that the configuration file sync.conf contains too many entries.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1007
Message
Probable
Cause
Indicates that the PDM process failed to create the specified file name.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1008
Message
Probable
Cause
Indicates that the PDM system call to getCfg failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1009
Message
<timestamp>, [PDM-1007], <sequence-number>,, WARNING, <system-
name>, File not created: <file name>
<timestamp>, [PDM-1008], <sequence-number>,, WARNING, <system-
name>, Failed to get the number of uports
<timestamp>, [PDM-1009], <sequence-number>,, WARNING, <system-
name>, Can't update Port Config Data