Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

47-4 Fabric OS Message Reference
Publication Number: 53-1000242-01
PDM-1010
47
Probable
Cause
Indicates that the PDM system call to setCfg failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1010
Message
Probable
Cause
Indicates that the PDM process could not open the specified file name.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1011
Message
Probable
Cause
Indicates that the PDM process could not read data from the specified file name.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1012
Message
<timestamp>, [PDM-1010], <sequence-number>,, WARNING, <system-
name>, File open failed: <file name>
<timestamp>, [PDM-1011], <sequence-number>,, WARNING, <system-
name>, File read failed: <file name>
<timestamp>, [PDM-1012], <sequence-number>,, WARNING, <system-
name>, File write failed: <file name>