Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

47-6 Fabric OS Message Reference
Publication Number: 53-1000242-01
PDM-1019
47
Probable
Cause
Indicates that a system call failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity CRITICAL
PDM-1019
Message
Probable
Cause
Indicates that one line of the pdm.conf file is too long.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
PDM-1020
Message
Probable
Cause
Indicates that the indicated file path name is too long. The maximum character limit is 49 characters.
Recommended
Action
Use a path name with under 49 characters for the files to be replicated.
Severity WAR NIN G
PDM-1021
Message
<timestamp>, [PDM-1019], <sequence-number>,, WARNING, <system-
name>, File path or trigger too long
<timestamp>, [PDM-1020], <sequence-number>,, WARNING, <system-
name>, Long path name (<Path>/<File Name>), Skip
<timestamp>, [PDM-1021], <sequence-number>,, WARNING, <system-
name>, Failed to download area port map