Manualshelf

Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit
361362363364365366367368369370
Fabric OS Message Reference 48-1
Publication Number: 53-1000242-01
Chapter
48
PDTR System Messages
PDTR-1001
Message
Probable
Cause
Indicates that information has been written to the panic dump files. The watchdog register codes are as
follows:
• 0x10000000 bit set means that the watch dog timer (WDT) forced a core reset.
• 0x20000000 bit set means that the WDT forced a chip reset.
• All other code values are reserved.
Recommended
Action
Run the pdShow command to view the panic dump and core dump files.
Severity INFO
PDTR-1002
Message
Probable
Cause
This message indicates that information has been written to the panic dump and core dump files and a
trap generated. The watchdog register codes are as follows:
• 0x10000000 bit set means that the watch dog timer (WDT) forced a core reset.
• 0x20000000 bit set means that the WDT forced a chip reset.
• All other code values are reserved.
Recommended
Action
Run the pdShow command to view the panic dump and core dump files.
Severity INFO
<timestamp>, [PDTR-1001], <sequence-number>,, INFO, <system-name>,
< informational message >
<timestamp>, [PDTR-1002], <sequence-number>,, INFO, <system-name>,
< informational message >