Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 54-1
Publication Number: 53-1000242-01
Chapter
54
RCS System Messages
RCS-1001
Message
Probable
Cause
Indicates that the RCS feature has been disabled on the local switch because not all switches in the
fabric support RCS or the switch is in nonnative mode.
Recommended
Action
Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS
v2.6, v3.1 and greater, v4.1 and greater.
Run the firmwareDownload command to upgrade the firmware for any switches that do not support
RCS.
Severity INFO
RCS-1002
Message
Probable
Cause
Indicates that the RCS feature has been enabled. RCS must be capable on all switches in the fabric to be
enabled. If all switches are capable, it is automatically enabled.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [RCS-1001], <sequence-number>,, INFO, <system-name>,
RCS has been disabled. Some switches in the fabric do not support
this feature
<timestamp>, [RCS-1002], <sequence-number>,, INFO, <system-name>,
RCS has been enabled.