Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-9
Publication Number: 53-1000242-01
SEC-1037
58
SEC-1037
Message
Probable
Cause
Indicates that the WWN entered in the policy member list had an invalid format.
Recommended
Action
Run the command again using the standard WWN format, 16 hexadecimal digits grouped as eight colon
separated pairs. For example: 50:06:04:81:D6:F3:45:42.
Severity ERROR
SEC-1038
Message
Probable
Cause
Indicates that an invalid domain ID was entered.
Recommended
Action
Verify that the domain ID is correct, if not, then re-run the command using the correct domain ID.
Severity ERROR
SEC-1040
Message
Probable
Cause
Indicates that the port list contains the wildcard asterisk (*) character. You cannot use the asterisk in a
port list.
Recommended
Action
Enter the port list values without any wildcards.
Severity ERROR
<timestamp>, [SEC-1037], <sequence-number>,, ERROR, <system-name>,
Invalid WWN format <invalid WWN>.
<timestamp>, [SEC-1038], <sequence-number>,, ERROR, <system-name>,
Invalid domain <domain ID>.
<timestamp>, [SEC-1040], <sequence-number>,, ERROR, <system-name>,
Invalid portlist (<port list>). Cannot combine * with port member in
the same portlist.