Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-11
Publication Number: 53-1000242-01
SEC-1044
58
SEC-1044
Message
Probable
Cause
Indicates that the specified member is a duplicate in the input list. The list can be a policy list or a switch
member list.
Recommended
Action
Do not specify any duplicates.
Severity ERROR
SEC-1045
Message
Probable
Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity ERROR
SEC-1046
Message
Probable
Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity ERROR
<timestamp>, [SEC-1044], <sequence-number>,, ERROR, <system-name>,
Duplicate member <member ID> in (<List>).
<timestamp>, [SEC-1045], <sequence-number>,, ERROR, <system-name>,
Too many port members.
<timestamp>, [SEC-1046], <sequence-number>,, ERROR, <system-name>,
Empty list.