Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-17
Publication Number: 53-1000242-01
SEC-1071
58
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR
SEC-1071
Message
Probable
Cause
Indicates that no changes in the defined security policy database need to be activated at this time.
Recommended
Action
Verify that the security event was planned. First change some policy definitions, then run the
secPolicyActivate command to activate the policies.
Severity ERROR
SEC-1072
Message
Probable
Cause
Indicates that the specific policy type is empty. The security database is corrupted for unknown reasons.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR
SEC-1073
Message
Probable
Cause
Indicates that the specific policy type is empty. The security database is corrupted for unknown reasons.
Recommended
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR
<timestamp>, [SEC-1071], <sequence-number>,, ERROR, <system-name>,
No new security policy data to apply.
<timestamp>, [SEC-1072], <sequence-number>,, ERROR, <system-name>,
<Policy type> Policy List is Empty!
<timestamp>, [SEC-1073], <sequence-number>,, ERROR, <system-name>,
No FCS policy in list!