Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

58-42 Fabric OS Message Reference
Publication Number: 53-1000242-01
SEC-1171
58
Severity INFO
SEC-1171
Message
Probable
Cause
Indicates that the switch is segmented, and secure mode is disabled on the switch because there was no
license present or no PKI objects.
Recommended
Action
Run the pkiShow command to check if all PKI objects exist. If they do not exit, run the pkiCreate
command to create them for the switch.
Run the licenseAdd command to install the required license key. Refer to your switch supplier to obtain
a license if you do not have one.
Severity ERROR
SEC-1172
Message
Probable
Cause
Indicates that the switch is unable to determine its role (primary FCS or backup FCS) in the secure
fabric.
Recommended
Action
Verify that all switches in the fabric are in time synchronization with the primary and that no external
entity is trying to access the fabric. When verification is complete, retry the operation.
Severity ERROR
SEC-1173
Message
Probable
Cause
Indicates that the switch has lost contact with the primary FCS switch in the secure fabric. This could be
due to the primary FCS being disabled.
Recommended
Action
If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS.
Severity ERROR
<timestamp>, [SEC-1171], <sequence-number>,, ERROR, <system-name>,
Disabled secure mode due to invalid security object.
<timestamp>, [SEC-1172], <sequence-number>,, ERROR, <system-name>,
Failed to identify role.
<timestamp>, [SEC-1173], <sequence-number>,, ERROR, <system-name>,
Lost contact with Primary FCS switch.