Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-45
Publication Number: 53-1000242-01
SEC-1183
58
SEC-1183
Message
Probable
Cause
Indicates that a security database conversion has failed because of an invalid value.
Recommended
Action
Retry the command with a valid value.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
SEC-1184
Message
Probable
Cause
Indicates that the specified action is applied to the specified RADIUS server configuration. The possible
values for actions are "ADD", "REMOVE", "CHANGE", and "MOVE".
Recommended
Action
No action is required.
Severity INFO
SEC-1185
Message
Probable
Cause
Indicates that the switch database was enabled or disabled as the secondary AAA when RADIUS is the
primary AAA mechanism.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [SEC-1183], <sequence-number>,, ERROR, <system-name>,
Policy to binary conversion error: Port <port number> is out range.
<timestamp>, [SEC-1184], <sequence-number>,, INFO, <system-name>,
Radius configuration change, action <action>, server ID <server>.
<timestamp>, [SEC-1185], <sequence-number>,, INFO, <system-name>,
<action> switch DB.