Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-53
Publication Number: 53-1000242-01
SEC-1253
58
SEC-1253
Message
Probable
Cause
Indicates that an internal error has caused the DCC policy update to fail in the provision, commit, or
cancel phases.
Recommended
Action
Retry the failed security command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
SEC-1300
Message
Probable
Cause
Indicates that the switch is set up with VC-encoded mode.
Recommended
Action
Turn off VC-encoded mode before enabling security.
Severity INFO
SEC-1301
Message
Probable
Cause
Indicates that the switch is interop-mode enabled.
Recommended
Action
Disable interop-mode using the interopMode command before enabling the Secure Fabric OS feature.
Severity INFO
<timestamp>, [SEC-1253], <sequence-number>,, ERROR, <system-name>,
Bad DCC interface state during <Phase>, state=<state>.
<timestamp>, [SEC-1300], <sequence-number>,, INFO, <system-name>,
This switch is in VcEncode mode. Security is not supported.
<timestamp>, [SEC-1301], <sequence-number>,, INFO, <system-name>,
This switch is in interop mode. Security is not supported.