Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

58-54 Fabric OS Message Reference
Publication Number: 53-1000242-01
SEC-1302
58
SEC-1302
Message
Probable
Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity INFO
SEC-1303
Message
Probable
Cause
Indicates that the currently installed software version does not support the Brocade Secure Fabric OS
feature.
Recommended
Action
Run the firmwareDownload command to update the firmware to the latest version for your specific
switch. Verify that the firmware you are installing supports the Brocade Secure Fabric OS feature.
Severity INFO
SEC-1304
Message
Probable
Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity INFO
<timestamp>, [SEC-1302], <sequence-number>,, INFO, <system-name>,
This switch does not have all the required PKI objects correctly
installed.
<timestamp>, [SEC-1303], <sequence-number>,, INFO, <system-name>,
This software version does not support security.
<timestamp>, [SEC-1304], <sequence-number>,, INFO, <system-name>,
This switch has no security license.