Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 58-55
Publication Number: 53-1000242-01
SEC-1305
58
SEC-1305
Message
Probable
Cause
Indicates that there has been a corruption during the distribution of the security database. This can only
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity INFO
SEC-1306
Message
Probable
Cause
Indicates that the certificate could not be verified with root certificate authority (CA). This could
happen if an unauthorized switch tries to access the fabric that is not certified by a trusted root CA or a
root CA certificate does not exist on the switch.
Recommended
Action
Run the pkiShow command and verify that all PKI objects exist on the switch. If a failure to validate
PKI objects occurs, follow the steps for re-creating PKI objects outlined in the Secure Fabric OS
Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not trying to access
the fabric.
Severity INFO
SEC-1307
Message
Probable
Cause
Indicates that after some servers timed out, the specified RADIUS server responded to a switch request.
Recommended
Action
If the message appears frequently, move the responding server to the top of the RADIUS server
configuration list using the aaaConfig command.
Severity INFO
<timestamp>, [SEC-1305], <sequence-number>,, INFO, <system-name>,
This switch has no zoning license.
<timestamp>, [SEC-1306], <sequence-number>,, INFO, <system-name>,
Failed to verify certificate with root CA.
<timestamp>, [SEC-1307], <sequence-number>,, INFO, <system-name>,
Got response from Radius server <Radius server identity>.