Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

59-2 Fabric OS Message Reference
Publication Number: 53-1000242-01
SNMP-1004
59
Recommended
Action
Retry changing the SNMP community strings from the primary switch.
Severity ERROR
SNMP-1004
Message
Probable
Cause
Indicates that the SNMP configuration is incorrect and the SNMP service will not work correctly.
Recommended
Action
Change the SNMP configuration back to the default.
Severity ERROR
SNMP-1005
Message
Probable
Cause
Indicates that the SNMP configuration has changed.
Recommended
Action
Use the snmpConfig --show command to see the new configuration.
Severity INFO
SNMP-1006
Message
Probable
Cause
Indicates that the SNMP configuration group was reset to the factory default.
Recommended
Action
Use the snmpConfig --show for the group to see the new configuration.
<timestamp>, [SNMP-1004], <sequence-number>, FFDC, ERROR, <system-
name>, Incorrect SNMP configuration.
<timestamp>, [SNMP-1005], <sequence-number>, AUDIT, INFO, <system-
name>, SNMP configuration attribute, <Changed attribute>, has
changed from <Old Value> to <New Value>
<timestamp>, [SNMP-1006], <sequence-number>, AUDIT, INFO, <system-
name>, <SNMP Configuration group> configuration was reset to
default