Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 68-1
Publication Number: 53-1000242-01
Chapter
68
UCST System Messages
UCST-1003
Message
Probable
Cause
Indicates that duplicate paths were reported to the specified domain from the specified output port. The
path database (PDB) pointer is the address of the path database and provides debugging information.
Recommended
Action
No action is required.
Severity INFO
UCST-1007
Message
Probable
Cause
Indicates that the switch detected an inconsistency in the routing database between the routing protocol
and the hardware configuration. The first port number displayed is what the hardware has configured
and the second port number displayed is what the protocol is using.
Recommended
Action
Run the switchDisable command and then the switchEnable command to reset the routing database.
Run the uRouteShow command to display the new routing tables.
Severity CRITICAL
<timestamp>, [UCST-1003], <sequence-number>,, INFO, <system-name>,
Duplicate Path to Domain <domain ID>, Output Port = <port number>,
PDB pointer = 0x<value>
<timestamp>, [UCST-1007], <sequence-number>, FFDC, CRITICAL,
<system-name>, Inconsistent route detected: Port = <port number>,
should be <port number>